NOVODUR H701
Novodur® acrylonitrile butadiene styrene (ABS) polymers feature high surface quality and good impact strength. Novodur® H701 is an ABS injection molding grade with a good balance of heat resistance, impact strength and flowability. Furthermore, it is of low emission, i.e. suitable to produce parts which fulfill interior emission requirements of the automotive OEMs.
Key Features
- Heat resistance
- High gloss
- Wide gloss range
- Low emission
- Wide gloss range
- Low emission
Applications
- Unpainted automotive interior: loudspeaker grills, air ventings
- Unpainted automotive interior: steering wheel covers, roof consoles
- Automotive exterior trim : mirror housings, exterior pillars & trims, spoilers
- Painted/ decorated Automotive interior: glove boxes, centre consoles, instrument panel trims
- Housings for electrical & electronic devices
Industries
-
Grade Version
Please Sign in or Register with INEOS Styrolution to download REACH and other Regulatory Documents
New to INEOS Styrolution? Registration
-
Properties
Properties of NOVODUR H701
Property, Test Condition Standard Unit Values Rheological Properties Melt Volume Rate 220 °C/10 kg ISO 1133 cm³/10 min 8 Mechanical Properties Charpy Notched Impact Strength, 23° C ISO 179/1eA kJ/m² 22 Charpy Notched Impact Strength, -30 °C ISO 179/1eA kJ/m² 12 Charpy Unnotched, 23 °C ISO 179/1eU kJ/m² 180 Charpy Unnotched, -30 °C ISO 179/1eU kJ/m² 120 Izod Notched Impact Strength, 23 °C ISO 180/A kJ/m² 22 Izod Notched Impact Strength, -30 °C ISO 180/A kJ/m² 12 Tensile Modulus ISO 527 MPa 2100 Tensile Stress at Yield, 23 °C ISO 527 MPa 41 Tensile Strain at Yield, 23 °C ISO 527 % 2.7 Tensile Stress at Break, 23 °C ISO 527 MPa 33 Tensile Strain at Break, 23 °C ISO 527 % > 15 Nominal Strain at Break, 23 °C ISO 527 % 17 Flexural Modulus, 23 °C ISO 178 MPa 2100 Flexural Strength, 23 °C ISO 178 MPa 65 Hardness, Ball Indentation ISO 2039-1 MPa 95 Thermal Properties Vicat Softening Temperature, VST/B/120 (50N, 120 °C/h) ISO 306 °C 107 Vicat Softening Temperature VST/B/50 (50N, 50 °C/h) ISO 306 °C 105 Heat Deflection Temperature A; (annealed 4 h/80 °C; 1.8 MPa) ISO 75 °C 99 Heat Deflection Temperature B; (annealed 4 h/80 °C; 0.45 MPa) ISO 75 °C 105 Coefficient of Linear Thermal Expansion ISO 11359 10-6/°C 90 Electrical Properties Dielectric Strength, Short Time, 1.0 mm IEC 60243-1 kV/mm 33 Comparative Tracking Index IEC 60112 V 600 Other Properties Density ISO 1183 kg/m³ 1040 Glow wire test (GWFI), 2.0 mm IEC 60695-2-12 °C 700 Processing Linear Mold Shrinkage ISO 294-4 % 0.5 - 0.8 Melt Temperature Range ISO 294 °C 230 - 260 Mold Temperature Range ISO 294 °C 60 - 80 Drying Temperature - °C 80 Drying Time - h 2 - 4 Typical values for uncolored products
Please note that all processing data stated are only indicative and may vary depending on the individual processing complexities.
Please consult our local sales or technical representatives for details. -
Processing
Processing of NOVODUR H701
-
Safety Data Sheet